Picture	Description	Approx Cost & Size
	Gravoply / Metalex - Engraved and cut by the Router	155mm x 115mm
	3mm Acrylic Shark logo and lettering - Cut from standard 3mm Acrylic standard colours	Logo is 480mm long and "N" is 40mm high
	25mm Clear Acrylic with polished edges.	80mm x 60mm
	3mm Mirror and Acrylic inlayed into a black fret / frame.	430mm x 270mm
	3mm Brass straight off the WaterJet.	150mm high $19.50 / letter Cutting & Material
	Custom Wood (MDF) - cut by Lasermade and Metal Finished by Axolotl.
	5mm Stainless Steel, high pressure nitrogen cut with polished edges.
	1.6mm Stainless Steel Lighting Control Switch - Cut by Lasermade for Dynalite
	3mm Acrylic lettering on 3mm white panel at the front of Lasermades factory.
	A combination of 4.5mm clear, 3mm colours and a 10mm clear frame.
	50mm thick Aluminium - straight off the WaterJet
	12mm thick Stainless Steel components - WaterJet cut.
	18mm MDF - Router engraved and cut.
	20mm clear and 3mm yellow fitting into a 6mm black stand.
	A combination of cuts on the wall at Lasermade.
	A fret design, colour filled with UV constant inks.
	HSV Logo in 3mm Red with 10mm clear card holder cut. Held together with brass screws.	150mm high Approx.
	3mm Customwood, Painted and fitted together pieces to form the castle.
	Customwood frets - you can colour the customwood or colour the glass to get the effects you need.
	Complete cabinet made form customwood.
	Candelabra